There are 14 files, weighing 16.7 MiB with 1,729 hits in Controls.
Displaying 1 to 14 of 14 files.
Controls
ALC15 Twilight Switch
» 1.3 MiB - 99 hits - 25/01/2011
The ALC15 twilight switch will turn artificial lighting on when the ambient
light falls below a preset level. The artificial lighting will then be turned off
either when the ambient light exceeds the preset level (auto off) or after a
preset time delay (timed off).
EBDSPIR-PRM PIR (passive infrared) detector
» 1.4 MiB - 175 hits - 25/01/2011
The EBDSPIR-PRM PIR (passive infrared) detector provides automatic control of lighting loads with
optional manual control. It can be used on incandescent, fluorescent and compact fluorescent lighting, and has the added benefit of being able to connect an external switch.
EBDSPIRD Dimming Ceiling Detector
» 686.9 KiB - 107 hits - 27/01/2011
The EBDSPIRD ceiling mounted occupancy control will turn on when a moving body is detected in a room. When the body is no longer detected, the units will switch off after an adjustable time period. If the body moves within this time period, the timing will be reset. The unit also provides a dimming output.
ELLIPSE and KH2 Time Lag Switches
» 2.2 MiB - 163 hits - 27/01/2011
The ELLIPSE and KH2 time lag switches are a quick and effective way to reduce energy consumption for lighting applications. Pressing the button or touch pad brings the lights on; the lights will then switch off automatically after a preset time period has elapsed.
ELT10 Emergency Lighting Test Switch
» 129.8 KiB - 93 hits - 27/01/2011
The ELT10 emergency lighting test switch is designed to test the function of emergency luminaires. A key switch is used to interrupt the supply to the luminaires for a pre-programmed period of time. At the end of the time period the supply to the luminaires is automatically re-instated. The result is that there is no risk of depleting the batteries in the emergency fitting.
ENERSTAT-T Electronic Thermostat
» 1.3 MiB - 120 hits - 27/04/2011
The ENERSTAT-T electronic thermostat will accurately maintain the temperature of a room at two levels (or setpoints): the setback temperature
and the boost temperature.
Normally the lower setback temperature level is maintained. When the front of the unit is touched, the higher boost level is selected, but only for
a preset time period. After the time period the unit reverts to using the setback temperature.
GI1DPC Single Gang PIR Dimmer
» 2.4 MiB - 102 hits - 27/01/2011
The GI1DPC Single Gang PIR Dimmer
Single gang PIR Dimmer replaces a standard light
switch or dimmer, turns on / off automatically and has a security mode.
MWS3-DD Microwave Presence Detector
» 333.9 KiB - 106 hits - 28/01/2011
The MWS3-DD microwave presence detector provides automatic control of lighting loads with optional manual control. It can be used on incandescent, fluorescent and compact fluorescent lighting and DSI or DALI digital dimming ballasts over 1 or 2 channels. The MWS3-DD detects movement using a highly sensitive microwave detector. This works by emitting low power microwave signals and measuring the reflections as the signals bounce off moving objects. The MWS3-DD has a unique adjustable sensor head that allows the area of detection to be optimised for the application.
MWS3-DDSI Microwave Presence Detector
» 262.6 KiB - 89 hits - 28/01/2011
The MWS3-DDSI Microwave Presence Detector are designed to provide automatic control of lighting loads.
MWS6-DD Ceiling Microwave Presence Detector
» 1.1 MiB - 126 hits - 28/01/2011
The MWS6-DD microwave presence detector provides automatic control of lighting loads with optional manual control. It can be used on incandescent, fluorescent and compact fluorescent lighting and DSI or DALI digital dimming ballasts over 1 or 2 channels. The MWS6-DD detects movement using a highly sensitive microwave detector. This works by emitting low power microwave signals and measuring the reflections as the signals bounce off moving objects. When an area is no longer occupied the load will switch off after an adjustable time out period.
MWS7 Direct DIM Microwave Aisle Occupancy Detector
» 1.7 MiB - 93 hits - 27/01/2011
The MWS7 is a microwave occupancy detector that provides automatic control of lighting loads, and is especially suited for warehouse applications. When a person or fork lift truck enters the aisle or corridor, the sensor will turn the lights on, or raise the level of light output. After a pre-determined period, the lights will turn off or dim down. The detector uses advanced microwave technology that allows the range of detection to be accurately set, irrespective of whether the object is a person or a fork lift truck (a common problem with other types of detector is that larger objects are picked up at longer distances, making accurate setup impossible). A further benefit of the MWS7 is that it has good immunity to vibration.
PDS & PDS-OV No Neutral Presence Detector
» 1.5 MiB - 106 hits - 27/01/2011
The PDS presence detection switch replaces a standard single gang light switch. It detects movement using a PIR sensor and turns the lights on, (either incandescent and fluorescent loads). An internal light sensor is provided for additional energy saving. When an area is occupied lighting is only switched on when the level of natural light is below a preset level. When an area is no longer occupied the lights will switch off after an adjustable time out period.
VITM6 Vitesse Modular 6 - Dimming Modules
» 1.2 MiB - 117 hits - 27/01/2011
The Vitesse modular system is a cost effective method of providing power and control for lighting installations in indus-trial, commercial and retail buildings. The modular approach allows for between 4 and 16 luminaires to be connected. The VITM6 is for use with dimming luminaires.
VITP-MB,D,DSI Vitesse Plus Marshalling Box
» 1.1 MiB - 233 hits - 27/01/2011
Vitesse plus is a flexible lighting control system which provides effective power delivery and control
for lighting installations in commercial, educational and healthcare buildings.